| 18 Titles Match Your Query |
Showing 1 through 18 of 18
|
1.
Survey report 2010/11 summer season Geoscience Australia Authors - Ryan Ruddick, Sam Griffiths and Nicholas Brown / Geoscience [survey_2010-11]
Executive Summary from the report:
Geoscience Australia's involvement in Antarctica has primarily been focused on the maintenance and enhancement of geodetic infrastructure within the Australian Antarctic ...
|
2.
Cape Roberts Tide Gauge records since 1990 [K042_1990_2012_NZ_1]
A tide gauge was installed at Cape Roberts in November 1990 and has been in near continuous operation since. A 10 minute average of water depth was recorded each hour with hourly averages of wind ...
|
3.
Tidal effects on the ice concentration and lead fraction over the continental shelf and slope off Wilkes Land [ASAC_2944]
Metadata record for data from AAS (ASAC) project 2944.
Public
Sea ice and tides are important factors affecting ocean-atmosphere heat transfer and deep water formation. They affect climate and the ...
|
4.
Survey report 2008/09 summer season Geoscience Australia Authors - Ryan Ruddick and Alex Woods / Geoscience Australia [survey_2008-09]
This metadata record details a number of survey reports produced by Geoscience Australia surveyors, during the 2008-2009 Antarctic season.
The available survey reports in pdf format are:
Davis gravity ...
|
5.
Tide Gauge Records, Macquarie Island [Macquarie_Island_TG]
Tides are recorded at Macquarie Island using two sensors, one an acoustic height measuring system and the other a pressure measuring system. The raw records are stored at AADC.
The records are ...
|
6.
Tide Gauge Records, Beaver Lake, Australian Antarctic Territory [Beaver_Lake]
Tides were measured using a portable pressure transducer secured to fast ice at the mouth of Pagodroma Gorge with the transducer about 4 metres below low water line. A 30 day record was obtained. ...
|
7.
Tide Gauge Records, Casey, Australian Antarctic Territory [Casey_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Casey.
Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in ...
|
8.
Tide Gauge Records, Casey, Australian Antarctic Territory [Casey_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Casey.
Tidal records are retrieved from the gauge using an inductive loop lowered through a hole in ...
|
9.
Tide Gauge Records, Davis, Australian Antarctic Territory [Davis_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Davis in 7 metres of seawater.
Tidal records are retrieved from the gauge using an inductive loop lowered ...
|
10.
Tide Gauge Records, Davis, Australian Antarctic Territory [Davis_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring at Davis in 7 metres of seawater.
Tidal records are retrieved from the gauge using an inductive loop lowered ...
|
11.
Tide Gauge Records, Heard Island [Heard_Tides]
Tides were measured using a portable pressure transducer secured just below low water line. A 22 hour record was obtained. A connection was made to the local Pageos benchmark by leveling and a 2 hour ...
|
12.
Tide Gauge Records, Stillwell Hills, Australian Antarctic Territory [Stillwell_Tides]
Tides were measured using a portable pressure transducer secured just below low water line. A 30 day record was obtained.
Numerous manual water level measurements were made to connect the tide gauge ...
|
13.
Tide Gauge Records, Mawson, Australian Antarctic Territory [Mawson_TG_1]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Horseshoe Harbour at Mawson. Tidal records are retrieved from the gauge using an inductive loop lowered ...
|
14.
Tide Gauge Records, Mawson, Australian Antarctic Territory [Mawson_TG_2]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Horseshoe Harbour at Mawson.
Tidal records are retrieved from the gauge using an inductive loop lowered ...
|
15.
Tide Gauge Records, Zhong Shan, Larsemann Hills, Australian Antarctic Territory [Zhong_Shan_Tides]
Tides are measured using a submerged pressure type gauge secured in a heavy concrete mooring in Nella Fjord in the Larsemann Hills near Zhong Shan station.
Tidal records are retrieved from the gauge ...
|
16.
Mean sea level [SOE_Mean_Sea_Level]
INDICATOR DEFINITION
This indicator reports on the deviation of the annual mean sea level from the long-term sea level record.
TYPE OF INDICATOR
There are three types of indicators used in this report: ...
|
17.
Scientific Committee on Antarctic Research (SCAR) U.S. Library; USGS [EARTH_LAND_USGS_SCAR_US_LIB]
The Scientific Committee on Antarctic Research Library has maps on charts,
aerial photography, satellite imagery, geodetic control data, tide gauge
information, seismic exploration data, and miscellaneous ...
|
18.
Data from an Episode of Unusual Severity of Sea Ice in the Weddell Sea [CDA_AR_GEO_GLAF_UNUSUAL_EVENT]
The compiled data for the Icebreaker ARA "Almirante Irizar" (RHAI)
during her 2 stage of the Summer Antarctic Campaign 1996/1997 are
analyzed to understand the interactions of the sea ice with
astronomic, ...
|
|
Showing 1 through 18 of 18
|
